Stretch Wrapping

 

This often results in more fragile packaging, transport and processing pressures that are difficult to adapt to.

Here, you can do something to get over your load on their destination, which is about the same as we have in this blog post.

First, we are packing your load according to the basic stretch packing principle. At least the minimum load required for the load should be known. You have to know how many rotations must be applied to the payload. We should weigh the number of ounces of film on the load. The minimum control can be ensured wherever the load is applied. The load is bonded to a tray. The film is not dragged, led, or tailed. You need to check… Now what you’re doing is what you think you’re doing. Keep at least a change.

Second, you need to make sure your stretch wrapping paper works properly. At the same time, you need to maintain regular maintenance, or have your supplier do regular maintenance for you. The benefits are enormous.

The work of stretching wrapping sends the load from its original location to the destination, but it needs to always be in the sending condition. It can not only make a load glitter, but it can also ship it further. It’s worth it to do the right thing for the first time. We can see that it’s worth doing well.

Finally, when cost savings were involved, manual packaging did not achieve the cost reduction goal. The use of film can be significantly reduced by the machine. The stretched-out wrapping of a power-powered movie delivery system can stretch very high film, for example, by stretching up to 300% of the film, so that at least half of the film consumption can be reduced. For one person, if you want to wrap a load in your hand to stretch the movie, we know that it’s almost impossible.

 

 

 

 

 

 

The Pre-tension

 

How much stretching should you stretch? Does it stretch as much as possible?

In 1972, PL invented the first elastic packaging, and 60 rolls of plastic film were used by him, using these plastic films for dry-cleaning equipment. The film is placed on the tray of the idea, it relies on is a core of the brake, the purpose is to slow the speed of membrane, make its stretched a little bit longer, and will load compressed into a result is its goal. The invention went viral and evolved into today’s popular fpc1 packaging. Now, we rely on the fpc2 stretch membrane, and this fpc2 stretch membrane is quickly applied.

Process from their point of view, this is basically the same, need to be repeated thousands of times every day, because the workers need to use 12 and 18 inches wide hand stretch film, this hand stretch film is used to package weight.

Load safety is the most important thing that is determined by the capacity of the envelope, which is what we call the envelope force fpc3 film layer. As proven, stretching is not simply a factor.

Dollars and cents.

We all know that stretching a movie is actually an economic measure, or it has a more accurate way of saying that you can stretch a film before a movie is released, which is also an economic measure. The pretensioning membrane is also a stretch film, which can afford to stretch the film, and the stretch film and stretch film industry we know today are also being opened together.

The pretensioning membrane is used to save money.

A: do you know the percentage of pretensioning? Typically, a set of gears before packaging is determined by a common pretensioning percentage, which ranges from 150 to 300%. We can see that every foot of a roll of film, the film on the load is 2.5 to 4 feet.