Film Breaks

The main reason for the film break is improper film threading. The rupture of the film can happen in many cases, such as when it was a film. These cracks occur when the processing attitude of the film is discarded or processed. Buy “cheap” film is not possible, because the “cheap” film has higher defect risk, will produce more follow-up questions, that will bring you more trouble, such as gels, nicks, tears. The “cheap” film may not have as much tear resistance, which is also prone to its broken chances and, if it wants to extend to the performance film, it doesn’t have the ability.

If your film starts to break down, you need to find out as soon as possible, and you’ll need to solve these problems as quickly as possible. You need to ask these questions:

Is Film is thread correct? Is that correct? Is it defective? Gels, nicks, tears, etc.? Do they have sharp corners or bumps for loading and pallets? Is stretching wrapper is the right wrap force set? Are cracks, shearing, or resin piling up on the surface of the film? Film clip (on fully automatic stretch packaging) : what are the scissors clamps? Are there incisions or resin deposits on the surface of the film? For vacuum fixtures: is the air pressure correct? Is the air filter clean? These are questions that you need to think about, which may sound like a lot, but it’s really not that much trouble, as long as you’re willing to do it.

If none of these solutions reveal any problems, you can call your service technician and ask him or her to find the problem and solve the problem. Or for you, it’s ok to turn down the packaging, you can add more film revolutions. And you can say goodbye to the film breaking down! Come on!



Stretching Packing

If the offset by adding more not film, so, caused by the BaoLi will appear a reduction of deterrence, deterrence is the pressure of live load pressure, because of the emergence of this situation, so can lead to happen during the transit load drop, so as to whether the product, or business relationship, can cause great damage.

The packing force on your stretching pack has been set and this needs to be ensured. Also, it is necessary to check your load regularly. The purpose is to ensure that their control is within the standard. Don’t let demon film achieve the purpose of destroying your tensile packaging.

If you don’t know how much control your load should have, you can check our simple guide to get information.


Do you know that there is a serious problem with your stretching packing? Do you know how to solve this problem? We have three ways to stop the number one problem on the stretch wrap. Does that sound good? Well, let’s see what we can do.

As we all know, film fragmentation is not always a worry. This is also the number one problem for stretched packaging, and the problem is getting worse. Usually, they make a series of disastrous consequences happen. So, we can conclude that they are indeed enemies.

Here are three ways we can help you break down your risk for film:

Your load needs to be noticed because you need to prevent your product from sticking out of the load. In the case of load, 40% of the film is broken, which sounds serious, so we need to prevent this from happening, so you need to pay attention to your load. What is the correct sharp Angle? Operators need to go through strict training, teaching staff how to properly handle the film because to teach operators through the transmission system to correct guidance of film, which is a crucial step, you said right?



What’s wrong with your film, you know?

What’s wrong with your film, you know? There are seven reasons why you should be careful about the fragmentation of your film, which is why you should be careful.

Now we can see that the invention of stretching packaging has made great progress, and there have been many technical improvements. We need to help the shipper to assure their customers that their load equipment has minimal damage and minimal cost.

However, we can also see that stretching packaging is not a problem at all. Film fragmentation is the primary problem. On the automatic high-speed stretch of the packaging, the average volume of the film breaks three to seven times, and the chance of breakage is very high.

In this chart, there are at least seven reasons why film is broken. The way, unfortunately, is to understand why the last time the film was broken was not easy.

In a busy environment, it is very difficult to film the film fragmentation, at the same time, it is a tedious and time-consuming work. And if you want to keep the flow of production under pressure, it’s a hindrance to packers’ efforts to find their roots

When the film is broken, reconnecting the film and restarting the machine is what the operator usually does. Normally, this film will break again. As a quick fix, what operators often do is turn to a simple fix, which is the easiest way to turn the packaging down before the film ends.

Although immediate problems are being solved by closing the packaging forces, simple changes can lead to a lot of bad consequences, such as a series of damaging consequences.



Film Breaks

Especially when the film is in the cluster, usually, they do. In addition, for lock, label security procedures, it is time-consuming and laborious. All these situations, we all know it’s all for an operator, therefore, when the film rupture occurs, is very normal film tension into a solution to the problem.

However, despite the imminent problem is solved by us, but a simple knob can trigger a series of problems, these problems are destructive, unintended consequences, it can destroy the whole stretch packaging purpose – need to be to ensure that your product safety to the destination.

As the operator adjusts the membrane tension, it also reduces the control. Ultimately, it leads to higher risk and cost containment. In turn, operators go back to their Settings and make the film tense again.

In fact, the film tension was reduced and did not harm the containment force, if the operator took the appropriate response: more film was added. Unfortunately, forgetting or not knowing that they should do this is what they often do.

What caused the film to break down?

What should you do when the film is damaged? Is it correct to simply reject the film tension? ?

We can see that being caught in this cycle of film damage is a terrible place to be. So when your film starts to break down, the first thing you should notice is:

First, the stretch film of the work.

Does it fit properly?

Should you use this film?

Is it flawed? Like gels, cracks, tears, etc.?

In the second. Load and pallet.

1. Does it have sharp angles or bumps?

Third. What is the stretch wrapper?

Do you know that movie tension is correct?

2. Are there any scars on the surface contact surface, such as incisions, cutting or resin accumulation?

3. What is the membrane clip? What are the scissors forceps? On the surface of film contact, is there any indentation, cut marks, resin accumulation?

What about vacuum fixtures? Is it the right air pressure? Is the air filter kept clean?


Do you know the reason why your stretch film breaks?

Do you know the reason why your stretch film breaks? There are seven reasons for its fracture. Now, let’s see.

There’s a lot of tension in the stretch membrane — about three to seven times per roll. But in a typical day like for busy, stretch packaging operators don’t have time to make it clear why stretch film rupture, the operator will not know the reason why leads to their tensile membrane rupture.

So, how do they do it? They reduced the tension of the film to the extent that the film stopped breaking.

Although the immediate problem have been solved, but a series of destructive, unintended consequences were produced a simple knob, the whole purpose of stretch packaging was destroyed – your goods can be transported to the destination safely that needs to be ensured.

As we all know, film fragmentation is more than just a worry. They are also a serious problem, and they are the number one problem of stretching packaging. In some ways. They are indeed enemies.

What is the reason for your stretch film? We have three items to check.

There are a lot of stretch membranes – three to seven times per roll. But in a busy typical workday, the stretched packers have no time to figure out what causes their stretch film to rupture. As we all know, film damage is more than a stimulus. Their cause was found and repaired, otherwise a series of difficult and unescapable events would be caused by them.

This film breaks the cycle.

The damage of the film is the first step in this cycle. Then the operator can adjust the set of steps, usually the tension of the film will be reduced until the film stops.

We can understand why the operators chose to do this. First, there is no time for many operators to film the root cause of the damage.