Stretch Wrapping

fhopepack stretch wrapping machine

 

Do you know the forklift and fpc1 trays? Your stretching package needs to answer yes.

For your needs, we can design a stretch wrapper

. The thing you need to think about is buying, replacing or upgrading a stretch pack. What is one of the first and most basic questions you ask? The question is, “how does it fit? Actually, is it a forklift or a tray and pallet stretch wrapper?

As we all know, it is inevitable to have a narrow selection. The reason why we design some machines is to load the forklift. Then, you might think the right choice is a machine that can load a tray. Because it’s very obvious that it can also be loaded with a forklift.

Business change is what we know from experience. We also know that the nature of loads tends to change. However, there are also changes to labor costs, staffing, and throughput. These changes are something we cannot ignore.

You know what that means? Before you buy a machine, looking for upgrades and flexibility in the machine’s entire life cycle is what you need to do.

What is the payload of evolution?

 

Now it seems that for every customer, there is a specific need for loading, pallet configurations, tags, and so on. Perhaps, in general, it is often what you do (called 60) to stack products into five rows. Sooner or later, your sales and marketing team will find a new customer and this new customer is exciting. His repository receives requirements of 8 rows. Don’t you want to tell anyone about the broken machine you bought recently? We don’t think you won’t tell anyone.

Maybe you said it was to change the load: “I wouldn’t worry if we could only stack five stories. “Well, you’re probably right. However, if the situation is stronger, the direction and the correct column stack, better protection can be given to you.

 

You can choose the right pallet packaging.

If you need to start a newline cycle, the operator can use the remote control. At the end of the wrap cycle, a clamp on the automation unit can grab the film and then cut the film. The next cycle of film has been clamped in. At the same time. The need to manually fix the film to the next cycle is well removed.

By avoiding the repeat of the forklift, we can save about two minutes of work. That means $50,000 for a machine’s life.

Before stretching the wrapper, the forklift was also turned off by the operator and the seat belt was unbuckled. The operator climbed down from the forklift and wrapped everything in his hands.

So what’s going to happen?

We won’t say much about the reduction of labor. Semi-automatic stretching packaging now also has a function to reduce the load of film. The pretensioning membrane of this machine brings a lot of advantages. The company, for example, will stop losing money every year, before losing $6,000, or $42,000 in lost machine life.

The company’s freight manager said: “this semi-automatic elastic packaging has a lot of advantages. It can easily handle the transportation of our whole day, and we can save enough film costs. It’s also convenient to pay in the short term.”

Meanwhile, within a year of owning it, the machine will pay for itself. After seven years of ownership, the company retracted $79,000 in labor and film use.

This is the news that you can toast.

You can think about the new packaging. It is not feasible to pick the easiest or easiest. You can study this process carefully. Here, we have a lot of free education resources. These education resources, like our free eBooks, you can choose the right pallet packaging.

 

Do you know how to cut labor costs by semi-automatic stretch wrappers?

Do you know how to cut labor costs by semi-automatic stretch wrappers? If you don’t know, take a look at our article.

We all know that for manufacturing workers, their costs are expensive. In fact, according to the Bureau of Labor Statistics (Bureau of Labor Statistics), U.S. manufacturers pay staff salary is very high, generally speaking, the salary is a bit more than three times the national minimum wage. And the same is true in other developed countries, where they pay workers so much.

It’s their purpose to maximize the value of their people on the clock, and to do that, some smart companies are now using better tools to equip them. Their goal is to make them more efficient. Manual packaging or using obsolete machines is out of date, for them. They want to invest in semi-automatic stretch wrappers that can save time and money.

For example, a machine at the end of the film packaging cycle usually saves labor automatically, and in general, it can be saved every 30 seconds. Or an additional film begins with a cycle and reduces it to the end. The average two-minute load can be saved. That’s because their forklift driver didn’t get off.

If you need to get the machine done, then the operator can take the time to do something else. For example, they could do another job. For example, they can print the shipping tag or complete the bill of lading. This will make their day more efficient.

Doesn’t that sound cool? At the same time, within a few years, we can see that, in fact, thousands of dollars have been paid out. The chart below shows a lot of content. If you want to save labor and cost, you can do this by adding the popular automation features to the semi-automatic stretcher wrapper.

If you make the machines do a lot of work, then there’s no doubt that you’re doing better. If you add automation, the cost of the machine can be increased. However, each load is more than the labor savings. Usually, we cut it by automatically attaching the film and cutting it at the end of the loop, and the cost can be saved, and the labor is saved. Do you know what this means to you? 38 or you’ll be back in your pocket, and every time you pack it.

What is your reason for stopping here? In fact, we have other productivity improvements. For example, you can set up a scale on the turntable of a stretcher, so that you can wrap and weigh yourself. This could be an opportunity to rethink what you’re doing.

 

Labor Saving

Second, Second, stop wasting labor is something you can get.

The operator must perform a series of steps, which are about 20 time-consuming steps. The purpose of these steps is to complete the packaging cycle of a forklift truck on an old machine. Over the course of five years, the process adds up to about $50, 000 in waste, a waste of Labor (46.000). If you need to pack 50 load and payment operators per day ($11) $12 per hour.

The need to cut the film and save to the next cycle at the end of the loop is eliminated by increased automation. Operator can use lanyard switch or remote control device. The purpose is to start the newline cycle, and we all know that it’s not necessary to leave the forklift.

Do you know what another method of saving labor is? It has to do with weighing your load. If weighing your load is what you need to do. So, there is a choice that you have to put your stretch wrap on a scale, or another option is to shift the load to a single scale. It can be said that this process is time-consuming.

We know that there are some new stretching wrappers that have also installed scales on their turntables. The effect of these claims is to eliminate the dual processing load from 30 seconds to 1.5 minutes. Do you know what it does to move them from the wrapper to the independent platform scale? Over the course of five years, this means that 7,500 ($7,000) to 7,500 dollars and (14.000) of the workforce have been eliminated. Third, you can reduce the risk of accidents.

If it is an old machine, it may cause a higher risk of injury to your operator.

Your operator may be in danger of being tripped up. Also, the exposed engines and not sufficiently large turntables are included. No more than load is the purpose. In addition, they may not have updated security features in terms of security features. When he connects the film to the load, the operator’s back strain can be greatly reduced.

Do you know what the new machine does? It has built-in security features. However, old machines do not have built-in security features. If the load is moving, the film breaks. Then, the load will stop. The operator will not be tempted, the operator will not connect the membrane to the mobile load.

Do you know the best way to manage these risks? Avoiding them with the new machine is the best way. Each cycle of attaching and cutting movies is something they do actively. The need to drive from one truck to another is well removed.

.

The operator must perform a series of steps, which are about 20 time-consuming steps. The purpose of these steps is to complete the packaging cycle of a forklift truck on an old machine. Over the course of five years, the process adds up to about $50, 000 in waste, a waste of Labor (46.000). If you need to pack 50 load and payment operators per day ($11) $12 per hour.

The need to cut the film and save to the next cycle at the end of the loop is eliminated by increased automation. Operator can use lanyard switch or remote control device. The purpose is to start the newline cycle, and we all know that it’s not necessary to leave the forklift.

Do you know what another method of saving labor is? It has to do with weighing your load. If weighing your load is what you need to do. So, there is a choice that you have to put your stretch wrap on a scale, or another option is to shift the load to a single scale. It can be said that this process is time-consuming.

We know that there are some new stretching wrappers that have also installed scales on their turntables. The effect of these claims is to eliminate the dual processing load from 30 seconds to 1.5 minutes. Do you know what it does to move them from the wrapper to the independent platform scale? Over the course of five years, this means that 7,500 ($7,000) to 7,500 dollars and (14.000) of the workforce have been eliminated. Third, you can reduce the risk of accidents.

If it is an old machine, it may cause a higher risk of injury to your operator.

Your operator may be in danger of being tripped up. Also, the exposed engines and not sufficiently large turntables are included. No more than load is the purpose. In addition, they may not have updated security features in terms of security features. When he connects the film to the load, the operator’s back strain can be greatly reduced.

Do you know what the new machine does? It has built-in security features. However, old machines do not have built-in security features. If the load is moving, the film breaks. Then, the load will stop. The operator will not be tempted, the operator will not connect the membrane to the mobile load.

Do you know the best way to manage these risks? Avoiding them with the new machine is the best way. Each cycle of attaching and cutting movies is something they do actively. The need to drive from one truck to another is well removed.

 

Labor saving

Do you have any idea how to control low productivity growth? You can automate with elastic packaging.

The most productive time in America has passed, and that’s what many people think. The way we measure it is wrong, and that’s what a lot of people think. There are other people who have different ideas. Since the recession, businesses have been afraid to invest in capital equipment, but where did their technology come from? In fact, these devices will provide technology for them.

Simply put, the output per working time is productivity. For whatever reason, productivity has slowed. Very important is the health of the enterprise.

Now, many processes in manufacturing are likely to change and become more automated, which can be helpful in productivity. As we all know, stretching is a process.

Today, many companies use stretched packaging. In fact, this way of transporting goods is not only outdated, but it can’t produce the best results. Now, operators can use tools such as stretch-wrappers to reduce the amount of work associated with packaging each load. At the same time, a simple productivity boost has been provided.

What is the other role of stretching packaging? It can reduce the risk of product damage and the risk of injury. Movie consumption can also be reduced. All of these things that you see, this is a valuable bonus.

If manual packaging has been abandoned by you, then, if you want to increase productivity if you want to increase productivity in new and existing machines, there are many ways to do this. I was wondering if you have automatic cutting. Can you achieve weighing and packing at the same time? Or, can the management workflow go in and out of your stretch packaging and conveyor belts? Now, this is another chance to rethink and reorganize your stretching packaging process. It can maximize the value of the labor you put in.