You can choose the right pallet packaging.

If you need to start a newline cycle, the operator can use the remote control. At the end of the wrap cycle, a clamp on the automation unit can grab the film and then cut the film. The next cycle of film has been clamped in. At the same time. The need to manually fix the film to the next cycle is well removed.

By avoiding the repeat of the forklift, we can save about two minutes of work. That means $50,000 for a machine’s life.

Before stretching the wrapper, the forklift was also turned off by the operator and the seat belt was unbuckled. The operator climbed down from the forklift and wrapped everything in his hands.

So what’s going to happen?

We won’t say much about the reduction of labor. Semi-automatic stretching packaging now also has a function to reduce the load of film. The pretensioning membrane of this machine brings a lot of advantages. The company, for example, will stop losing money every year, before losing $6,000, or $42,000 in lost machine life.

The company’s freight manager said: “this semi-automatic elastic packaging has a lot of advantages. It can easily handle the transportation of our whole day, and we can save enough film costs. It’s also convenient to pay in the short term.”

Meanwhile, within a year of owning it, the machine will pay for itself. After seven years of ownership, the company retracted $79,000 in labor and film use.

This is the news that you can toast.

You can think about the new packaging. It is not feasible to pick the easiest or easiest. You can study this process carefully. Here, we have a lot of free education resources. These education resources, like our free eBooks, you can choose the right pallet packaging.


Stretch Film Cost

Case analysis, how does the semi-automatic stretching wrapper benefit the fermentation of cider? Now let’s look at the details.

In the United States, fermented apple juice is one of the fastest-growing beverage categories.

We can see that sales have increased in the United States since last year, and its sales have doubled. Production has also increased in the past three years, from 9.4 million gallons to 32 million gallons.

Why does this happen? This is an apple cider manufacturer that has made changes in its transportation department, so it can have such an obvious increase in sales. Below, we can see exactly how the cider maker does it.

But there are problems:

An apple cider maker employs only one operator. However, this operator needs to do two jobs. The operator needs a shovel to carry the packed bottles to the shipping dock. In fact, the process has not been a problem for years.

However, a few years ago, the number of the company increased, and the operator did not have enough time to pack and transport in his daily shift. So it’s a bad result. When it comes to dealers and retailers, a partial shipment delay occurs.

Fortunately, however, the company’s freight manager quickly realized the problem. It is very important to reduce the time of packing and transporting goods. One option is that he needs to hire another operator, and one option is to buy a stretch wrapping paper.

So what’s his solution?

Hiring an operator again is not the transportation manager’s choice. The transportation manager bought a semi-automatic packaging machine. He also bought an automated device. Connecting the membrane to the load is the machine. At the same time, it is the operator that starts the machine. Also, the operator does not need to leave the forklift when the load is unloaded from the turntable. Sounds like a lot of convenience, right?




Stretch Wrapping

This is broken!

It is necessary to identify the key issues.

This picture is a typical struggle story – it has good intentions and wrong attention – it is very common in the world of stretching packaging.

The only thing it needs is a $10 stretch film, and it can deliver a safe delivery truck tray. However, there is one thing that makes people very unhappy. Half of the total shipments on the way to the destination were damaged. So, every year, billions of dollars of losses are created.

Pursue real opportunities.

We spend more time and energy on reducing the cost of film, and we don’t spend much time and effort on reducing loss. This is particularly unfortunate because we get a lot of evidence. This evidence suggests that we can avoid as much as half of the transport loss as long as we make a better stretch package.

You know what the bigger payoff is? We can save a few percentage points on a $10 roll of film. Or, reduce the transport loss caused by the ineffectual stretching. Generally speaking, we can reduce it to half of us $250. Or maybe half the value of your truck.

Talk about an obvious thing.

Start now!

What we need to do is fix things that are really different. You need to take the first step. The first step is to reduce your shipping costs. For this, we can reduce by better stretching packaging. After all, forgetting to prevent shipping damage is the first reason you stretch the packaging.

Our foothold is the unpopularity of the 2008 joint industry report: there are real reasons and viable solutions.



Stretch Film Cost

Do you know how to reduce the damage or reduce the film cost? You need to solve big problems first!

You can identify the key issues first.

The company saw the cost of the film. Typically, the problem we focus on is how to reduce expenses by a few percentage points. However, they did not take into account the fact that they were actually saved.

The $10 stretch film is needed to deliver a typical truck. However, a quarter of the total shipments were damaged, so the damaged products could not be sold to the destination. So billions of dollars are lost every year.

Pursue real opportunities.

Generally speaking, we spend more time and energy on reducing the cost of film. However, we have not spent much time in reducing losses. This is particularly unfortunate. Why do you say that? Because our experience shows that products that become unmarketable from transportation losses can save on film costs by better stretching packaging.

So what constitutes “better stretching packaging”?

First, sufficient control needs to be applied to the top, middle and bottom of the load. What is deterrence? Generally speaking, we weigh it in pounds. The containment force is the thing that puts the payload together.

Lock or load the load onto the tray is the second. If there is no locked load on the tray. Then, in transit, it is possible to slip. The thing you need to do when a load is lifted by a forklift or a pallet is to wrap the load to the bottom of the tray. The purpose of this is to make the load more susceptible to the impact of the film. Winding the bottom of the film into a cable is the solution to this problem. We also need to lock the load on the tray. Then we pushed the cable to a tray about an inch on the deck. This can be easy when it is off the knife and fork of a pallet or forklift.

Also, the key to ensuring a pallet load is to avoid the reverse of the drag film. The tail of the drag film appears to be caught, pulled or torn, resulting in a loss of containment. The final result is a load failure.

So, you know what the bigger payoff is?

On the stretch film, a few percentage points are saved. Or can the damage be reduced by stretching?

Start now!

There are really different things that need to be fixed. You can take the first step. If you want to reduce your shipping losses, you can do so by better stretching the packaging. After all, preventing transport damage is a key reason we stretch the packaging first, you can’t forget.



Stretch Film Cost


Before loading and leaving the dock, the purpose of freight reduction is to be realized.

The current trend in Labor costs continues to rise. This year, us Labor costs hit record Numbers, the biggest gain in more than five years.

Stretching packaging needs to be considered, especially those that already involve manual packaging loads. We all know that this process is a time-consuming process. The operator sometimes has to do the same thing on the forklift truck.

In fact, when you’re using a wrapper that has an extended wrapper that improves productivity, it’s actually ok to avoid these tedious steps.

Here, we have three experts who have given hints, and with little effort, you can achieve the goal of reducing costs:

A dynamic pretensioning membrane conveying system has been invested in stretching packaging. This influential productivity boost can reduce movie costs substantially, and by experience, it is generally reduced by at least 50%. The process of extending the membrane is pre-stretching, and the membrane production can be improved. When two rollers rotate at two different speeds in the movie delivery system, the film stretches. If it’s a regular customer, he can save at least $25,000 in five years. You can use simple automation to achieve the goal of eliminating the labor force, which is a technology that has been saved at least $50,000 in the first five years. At this point, your operator still starts the machine with the remote control on the forklift. It is also ok to perform another task, and when the load ends and the loop completes, it is ok to select it. What needs to be done in packaging is weighing. Buying new stretched packaging with a built-in size is one option, and another option is to use existing wrappers on the platform. When weighing and packaging are being done at the same time, it is ok to double the load from 30 seconds to 1.5 minutes from one stretch wrapper to one platform scale. In 10 years, this will make the labor force much smaller, and in general it can reduce the labor force by $15,000 to $30,000. Also, when each load is weighed against you, the risk of paying an expensive no more than a truckload (LTL) is reduced.

Eliminating unnecessary steps can actually reduce labor, and your money will be saved – saving thousands of dollars in just a few years.


Stretch Wrapping


If you use two ways to increase automation, you can save a lot of money. If you don’t believe it, you can look down

You need to work smarter, not harder.

Automatically at the beginning of a cycle, a film will need to be added, and then attached to the load on the function, and, in the end, also need to be cut, which means that the operator in the case of without leaving the forklift, also can start the line cycle. You can put your driver on the forklift, and the average load per load is reduced by two minutes. The cost of this feature is about $4,000, and for a year, it’s about 30 times a day. You say this is not a very happy thing

As we can see, a lot of money has been saved by pre-stretching. One obvious consequence of this is that costs have been greatly reduced

Before the film is applied to the load, the pre-stretching roll elongates the membrane in the transmission system. The film stretches to 3000%, you can do it, you can turn 5,000 feet into 20,000 feet, and we can save a lot of money from stretching. Well, why don’t you do it? Have you ever calculated how much money you saved?

What is automatic payment?

The function of the extended wrapping machine is not only to help you pack better, but it also helps you to prevent the outflow of funds. In the years to come, even a small amount of investment can be turned into big savings.

The chart above shows the same savings for seven years. Just pack 30 pieces of goods a day, and a $14,000 machine could save you a lot of money, almost $53,900. Now, we can all see it, it’s a smart investment.