Stretch Wrapping


This often results in more fragile packaging, transport and processing pressures that are difficult to adapt to.

Here, you can do something to get over your load on their destination, which is about the same as we have in this blog post.

First, we are packing your load according to the basic stretch packing principle. At least the minimum load required for the load should be known. You have to know how many rotations must be applied to the payload. We should weigh the number of ounces of film on the load. The minimum control can be ensured wherever the load is applied. The load is bonded to a tray. The film is not dragged, led, or tailed. You need to check… Now what you’re doing is what you think you’re doing. Keep at least a change.

Second, you need to make sure your stretch wrapping paper works properly. At the same time, you need to maintain regular maintenance, or have your supplier do regular maintenance for you. The benefits are enormous.

The work of stretching wrapping sends the load from its original location to the destination, but it needs to always be in the sending condition. It can not only make a load glitter, but it can also ship it further. It’s worth it to do the right thing for the first time. We can see that it’s worth doing well.

Finally, when cost savings were involved, manual packaging did not achieve the cost reduction goal. The use of film can be significantly reduced by the machine. The stretched-out wrapping of a power-powered movie delivery system can stretch very high film, for example, by stretching up to 300% of the film, so that at least half of the film consumption can be reduced. For one person, if you want to wrap a load in your hand to stretch the movie, we know that it’s almost impossible.







 semi-Automatic Stretch Wrapping

Today’s semi-automatic stretch wrapping can include more pre-stretching
This is a labor-saving feature that can save you a lot of money. What can you do with the stretch wrap?
First, you can automatically cut the film at the end of the work.
After each cycle, your operator may not leave the forklift or tray. By eliminating this process, 30 seconds of work can be saved, or you can save $7,500 in five years.
Second, the film is captured at the end of the packaging cycle, and the line cycle can be activated without removing the forklift, and the film will be fixed on the load.
The need to cut the film at the end of the loop is not only eliminated, but the need to press the “start” button on the control panel has also been eliminated. Instead, your operators can stay on the forklift, the remote control to start the machine can be used, when the load for packaging, can also perform another task, and extract it can be completed in the cycle. We call this simple automation — it’s a technology that, in the first five years, at least $25,000 has been saved for typical users.
Thirdly, the project can achieve the purpose of weighing the load without increasing the cycle time.
Some stretched wrapping paper is marked on the turntable. When weighing and packing simultaneously, double the load of 30 seconds to 1.5 minutes from a stretch wrapper to an independent flat scale is something you can do. This will reduce the workforce of $7,000 to $15,000 in five years. Also, when you weigh your load each time, the risk of paying a lower fee than the truck’s weight is greatly reduced.
These features have reduced the lifetime of thousands of dollars in human life, and the excellent fpc3 has been provided. Even if they are in the 40 load/day applications, only 20% of the time is used, but they still have great economic significance.