You can choose the right pallet packaging.

If you need to start a newline cycle, the operator can use the remote control. At the end of the wrap cycle, a clamp on the automation unit can grab the film and then cut the film. The next cycle of film has been clamped in. At the same time. The need to manually fix the film to the next cycle is well removed.

By avoiding the repeat of the forklift, we can save about two minutes of work. That means $50,000 for a machine’s life.

Before stretching the wrapper, the forklift was also turned off by the operator and the seat belt was unbuckled. The operator climbed down from the forklift and wrapped everything in his hands.

So what’s going to happen?

We won’t say much about the reduction of labor. Semi-automatic stretching packaging now also has a function to reduce the load of film. The pretensioning membrane of this machine brings a lot of advantages. The company, for example, will stop losing money every year, before losing $6,000, or $42,000 in lost machine life.

The company’s freight manager said: “this semi-automatic elastic packaging has a lot of advantages. It can easily handle the transportation of our whole day, and we can save enough film costs. It’s also convenient to pay in the short term.”

Meanwhile, within a year of owning it, the machine will pay for itself. After seven years of ownership, the company retracted $79,000 in labor and film use.

This is the news that you can toast.

You can think about the new packaging. It is not feasible to pick the easiest or easiest. You can study this process carefully. Here, we have a lot of free education resources. These education resources, like our free eBooks, you can choose the right pallet packaging.

 

Stretch Film Cost

Case analysis, how does the semi-automatic stretching wrapper benefit the fermentation of cider? Now let’s look at the details.

In the United States, fermented apple juice is one of the fastest-growing beverage categories.

We can see that sales have increased in the United States since last year, and its sales have doubled. Production has also increased in the past three years, from 9.4 million gallons to 32 million gallons.

Why does this happen? This is an apple cider manufacturer that has made changes in its transportation department, so it can have such an obvious increase in sales. Below, we can see exactly how the cider maker does it.

But there are problems:

An apple cider maker employs only one operator. However, this operator needs to do two jobs. The operator needs a shovel to carry the packed bottles to the shipping dock. In fact, the process has not been a problem for years.

However, a few years ago, the number of the company increased, and the operator did not have enough time to pack and transport in his daily shift. So it’s a bad result. When it comes to dealers and retailers, a partial shipment delay occurs.

Fortunately, however, the company’s freight manager quickly realized the problem. It is very important to reduce the time of packing and transporting goods. One option is that he needs to hire another operator, and one option is to buy a stretch wrapping paper.

So what’s his solution?

Hiring an operator again is not the transportation manager’s choice. The transportation manager bought a semi-automatic packaging machine. He also bought an automated device. Connecting the membrane to the load is the machine. At the same time, it is the operator that starts the machine. Also, the operator does not need to leave the forklift when the load is unloaded from the turntable. Sounds like a lot of convenience, right?

 

 

 

Pallet Wrapping

We can put these steps in a short list to make more careful analysis. Now, as we can see, as you grow, the volume increases, and the understanding of labor and security will be the first area where the “corner is cut” and waste and/or injury infiltrated.

Areas of concern.

For most operations, turning around is the ultimate risk of harm. For example, when an operator moves from a forklift to a machine and performs certain functions, they usually move quickly.

This may save a bit of time, but the step of security may be skipped by the operator. Fpc2 requires an operator to set up his forklift, the parking brake needs to be set, and it needs to be fastened. We can see that if a process requires the operator to get on and off the channel, then people often ignore these steps.

However, these steps are easily overlooked steps that are often ignored when the trailer is waiting to be loaded at the end of the day.

A process with automation as the backbone needs to be designed.

If you have to decide how much your application needs to automation, first of all, material saving and security features need to be considered and used as a business process decision, and the second output requirements.

Don’t you want to wrap it up? It’s not ok to just pick the easiest one. You can study this process carefully. We are also happy to help when there is no obligation to call. With your current application, we can discuss it and suggest opportunities to optimize your processes to make your costs less and more efficient. Here, we also have a lot of free education resources, such as our free eBook, select the correct tray packaging guide, here, if you want to download, are free.

 

Automatic Pallet Wrapping

Semi-automatic and automated elastic packaging, which one should we choose?

How fast is it?

Generally speaking, buying a stretcher is a person’s choice, and we assume a question, which is also the most important question: “how fast can it run?” Generally speaking, people think that one of the most important selection criteria for stretching is speed. Sometimes, of course, it’s very important to speed. For example, the running speed of bottled water and beverage plants is incredible, including fully automated pallets and packaging. In this case, the decisive factor in choosing the appropriate stretch packaging material is the speed.

But we all know that this high volume extreme is unusual.

Applications, we know, are more common from 10 to 100 loads per day.

You know what our goal is?

If you look closely at your process, especially if you adopt a method to make your load optimized, certain goals can be identified and started to be optimized for them.

Typically, a secondary factor is the speed at which a stretching wrapper can wrap a load. For most people, the higher goal is usually to reduce the safety of labor and operators. On the contrary, the byproduct of customer demand and capacity is speed.

The speed is often misunderstood, which is remarkable. Generally, people want to buy a fpc1 wrapper, which can be calculated according to the daily output. Of course, for most loading terminals, there are peak times for arrival, loading and departure. But the output required during peak periods is much higher than the average of the day.

We can optimize our goals.

You know what really matters? Let’s take a closer look at what really matters – what really matters is lowering labor costs and improving efficiency.