Labor Saving

Do you know the benefits of replacing the old stretch wrap with the new stretch wrap? Now, let’s see.

If “wrappers” are the words you’ve been searching for recently. Whether or not to give up the old, rusty machine in the corner may be the thing to think about.

Or, perhaps, your idea is that your old machine still works well, and for a while you don’t need to replace it.

But, do you know that replacing an old elastic wrapper is not related to whether it is still running? If you use a new stretch wrapper, it can stop you wasting money on film and labor. In addition, they have the advantage of being safer.

There are many benefits to using a new wrapper. First, it can easily save you money. Second, the risk of injury to operators can also be reduced. Now, let’s take a look at the benefits of replacing old ones with old ones!

First, the cost of wasting film will be greatly reduced and reduced while working.

If a person packs 50 loads a day, it doesn’t use pre-stretch. Then, for five years, the opportunity cost about $35,000 ($32.000). Do you wish it were you?

The process of increasing production is pre-stretching. Do you know when that happened? It occurs when two rollers of the film delivery system rotate. Because of the two different speeds, the film stretches out. For example, if the film would be longer than 6,000 feet in 100 percent pre-stretching, it would become 12,000 feet.

For a while, most of the old machines lost the value of stretching. Sometimes they don’t even have the prestretched rollers.

However, it is very fortunate that most of the new stretching packages can be pre-stretched between 100% and 300%. The end result is that you can put thousands of dollars back in your wallet.

Stretch Wrapper

If is automation module options, it can achieve the goal of connect the film to the load, the purpose of let the operator can start the machine, and can also be removed from the wheel load, and leave the forklift is not needed. As we can see, it is very easy to adjust the load packaging selection on the control panel. On the control panel, you can display the number of packages at the top and bottom. On the machine is the operator’s guide. This operation guide has the ability to operate and adjust the machine.

So how do I know it’s reliable?

Looking for:

The indicator of market acceptance is a manufacturer with a large customer base, and life cycle testing is a key component that ensures reliability. And preventative maintenance is almost non-existent.

In any case, the chain has been replaced, and in general, it has been replaced with a belt. Lubrication or excessive noise is not necessary for a rotary support system. Lubrication or periodic adjustment is not required for a rotary drive system.

Q: if you want to have good support, what are the key factors?

A: according to these criteria, your potential purchase plan can be filtered:

Manufacturers provide support by providing support 24 hours a day, 7 days a week. If they are local dealers, they have factory training and certification technicians. The turntable machine is five years, it is the warranty period of the component, the warranty period of straddling machine is 3 years. There are operating manuals, video and parts lists for machines. Step-by-step troubleshooting and operational guidelines are provided by the machine. The promise of an extension was also provided by the manufacturer.

Know what you’re buying the most important thing. This suggests that you don’t need to take shortcuts. It is not equal to all machines. It is not advisable to tempt you into buying the wrong thing by making too good a deal. Remember, what you get is what you give.

 

 

 

Stretch Wrapping

Do you know what are the common problems of semi-automatic stretch wrappers?

Buying a stretch package now is an overwhelming process. The simplification problem is our goal. To achieve this, we focus only on a few areas when comparing models. For most of our customers, they care about the security, reliability, and ease of use of the machine. If there are problems in these areas, the support of the machine is what they hope for. You can read the following and learn how to evaluate semi-automatic stretching.

Problem: no one would say that their machine is unsafe. So, safe or not, how can I be sure?

A: we always believe that the safe stretching wrapping paper can stand out from the crowd. You can look for these features:

We closed all the wires and motors to prevent tripping and scratches and to prevent burning. What is the film transmission system: it is located on the same side of the mast, which is designed to prevent operators from walking between the mast and the load. Around the wheel, protection is needed to prevent the operator’s hand from being caught in the inside. If it’s a large enough turntable, you can let your tray stumble in the corners of your surroundings, which is very dangerous. We all know that there needs to be sufficient clearance between the edge of the load and the masts of the machine to prevent the operator from being sandwiched between it and the load.

Q: if you want to determine whether the machine is easy to use, what should I do?

Looking for:

Thread-technical simple film. In simple process, you can load the film on the load and the operator will not need the film on the tray. Automatic thin film cutting option can eliminate the purpose of artificial membrane cutting, so that operators can remove the goods from the turntable or change of loading area. Besides, it is not necessary to leave the forklift.