Put the goods in a tray, are you sure you really want to do this?
People buy elastic packages for a reason, and they are generally for a particular reason – packaging is their purpose. Machines, the number of packages at the top and bottom of the program, the packaging, and the speed delivery system for the turntable and film need to be set by them. Then, the machine had enough to make a product that could be wrapped up, which they believed it could get to its destination, but it could not be damaged.
But is it?
No, it’s not!
The most important factor in the effective packing load is the safety of the tray. If this is not the case, it may slip and the product may be damaged during shipment.
For most of today’s stretch wrappers, you’re not ready to deal with this problem. But most people don’t think much of it. When they are encouraged to do it by the machine, wrapping it at the bottom of the tray is what they will do. However, when the weight is picked up by the forklift or the tray fpc1, the film will be punctured by a fork. These puncture holes are also harmful, which can carry out loads that can cause a lot of damage to the membrane during load.
Avoid this problem is our purpose, more advanced stretch wrapper can stretch packaging can’t do other things, it by creating a network of only a few inches at the bottom of the film to make this problem solved. At the end of the cycle of wrap, the film will also automatically around, in general, we can see, this is the film will roll into a tight cable, and it will be left behind, in general are below the tray at the top of the board. We can see that the cable is very tight, lock the load on the pallet can be very good by cable, it is high enough, high enough to remove the fork, the reason is because they can receive the load.