Do you know anything about stretching packing? It prevents the load from slipping out of the tray. This is a very progressive manifestation.
Every day, the flow of goods from the pallets during transportation can be seen, resulting in billions of dollars lost and wasted each year. If the load does not hold well for its tray, it will be a big risk.
They have different load locking methods for different stretching wrappers. , at the end of the stretch packaging film by some wrappers in the rope like an accordion, the role of the other wrapper is thin film can be rolled into the cable, the others will film wrapped, in general, are wrapped in the bottom of the tray. The most effective is that film is our research result.
Under the pressure of transportation, the general roping trend is also loosened, and its effectiveness has been reduced. However, 3 to 5 inches at the bottom of the film can be winding into a tight cable, then people can push it to the tray – compared with than its deck plate, about an inch – lock load in lower pallets in order to prevent it from sliding off.
We know that the very important thing is the location of the cable. It needs to be high enough to avoid the knife and fork pierced by forklift or pallet, and is low enough for the purpose of locking the load on the tray.
In today’s world, there are many risks. If there is a simple, inexpensive and effective way to get them to their destination, what are the reasons for your risk?
If you want to learn more about locking your load onto a tray, you can look at our video, which is how the machine rolls the film into video.
If you’re looking for ways to improve your stretching packaging process, you can also check out our eBook, packaging and weight benefits of its basic content.