What’s the effect of stretching the packing? It can make your forklift driver more efficient.
Forklift trucks are used by many companies to move pallet cargo near their transportation area or warehouse. A necessary component of success is forklift, which can cause injury due to the warehouse operation.
Forklifts are often used by operators to transport goods using forklifts and carry goods from semi-automatic stretch wrappers. In the process, starting and closing are what they often do, and they start or close their forklift to start the machine. The more they leave the forklift, the more time they spend near the machine, the more time they spend, the greater the risk of injury.
Here are three reasons why your operators should be on their forklift in the process of load integration.
First, about two minutes of labor can be stopped by you.
A series of time consuming steps must be performed by the operator to start and close a forklift to complete a package cycle. Let’s take a look at the following sequence of steps:
First, Climb in forklift. Second, belt Buckle, seat. Third, Turn forklift. The fourth Pull to the load. The fifth, the Lower forks. The sixth, the Pick load. The seventh, Raise forks. 8 is a Pull to wrapper. The ninth, the Lower forks. The tenth Place, the load on the turntable. 11 is the Back of the forklift truck up 12 is the Lower forks. 13 is parking break the Set. The 14th is Unbuckle a seat belt. The Climb is 15 forklift. 16 is Walk to wrapper. The 17th is the Attach load. 18 is the corner of the film Press “start” button. The 19 is Watch the inside of the load cycle operation (about 1 minute) movie film cutting device. 20 is Walk Back to the fork.
Forklift trucks are used by many companies to move pallet cargo near their transportation area or warehouse. A necessary component of success is forklift, which can cause injury due to the warehouse operation.
Forklifts are often used by operators to transport goods using forklifts and carry goods from semi-automatic stretch wrappers. In the process, starting and closing are what they often do, and they start or close their forklift to start the machine. The more they leave the forklift, the more time they spend near the machine, the more time they spend, the greater the risk of injury.
Here are three reasons why your operators should be on their forklift in the process of load integration.
First, about two minutes of labor can be stopped by you.
A series of time consuming steps must be performed by the operator to start and close a forklift to complete a package cycle. Let’s take a look at the following sequence of steps:
First, Climb in forklift. Second, belt Buckle, seat. Third, Turn forklift. The fourth Pull to the load. The fifth, the Lower forks. The sixth, the Pick load. The seventh, Raise forks. 8 is a Pull to wrapper. The ninth, the Lower forks. The tenth Place, the load on the turntable. 11 is the Back of the forklift truck up 12 is the Lower forks. 13 is parking break the Set. The 14th is Unbuckle a seat belt. The Climb is 15 forklift. 16 is Walk to wrapper. The 17th is the Attach load. 18 is the corner of the film Press “start” button. The 19 is Watch the inside of the load cycle operation (about 1 minute) movie film cutting device. 20 is Walk Back to the fork.