Second, fpc1 puncture.
Every time on a forklift or pallet jack was wrapped in general, are wrapped in their tray at the bottom, because it is their forks piercing fpc1, so there must be a bad things happen.
There is a risk that in the course of carriage, membrane puncture could spread, such as diffusion from vibration and multiple operations, load leads to failure, so as to damage or sale of products have been lead to come out.
How do you get a tray of bonds to be created without a thin film piercing?
On the top deck of a tray, a movie cable can be placed, and a secure load to the tray connection needs to be created. Scroll to the bottom of the 5 inch film network into a compact cable in the drawing the last part of the packing of the cycle, drive down to tray — about an inch, it is below the deck plate, debt securities or a mixture of locking load tray is the most effective way.
The only way to bind the load to a pallet is not this method, but the way we recommend it is this way. This method than the “normal” (when the movie on a folding – like the rope) for positioning the rope just what you want in the tray is difficult – high enough to prevent puncture the hydraulic car or forklift forks and low enough bonds or lock loaded pallets.
Under the pressure of transportation, regular roping also tends to occur, which makes its efficiency greatly reduced. In fact, our research shows that a thin film cable connection is significantly better than conventional roping.
The goods on each tray should be connected to it is a good rule of thumb.
In today’s world, there are enough risks.
Why take the risk when there is a simple, inexpensive, and effective way to improve the safety of their destination?
Every time on a forklift or pallet jack was wrapped in general, are wrapped in their tray at the bottom, because it is their forks piercing fpc1, so there must be a bad things happen.
There is a risk that in the course of carriage, membrane puncture could spread, such as diffusion from vibration and multiple operations, load leads to failure, so as to damage or sale of products have been lead to come out.
How do you get a tray of bonds to be created without a thin film piercing?
On the top deck of a tray, a movie cable can be placed, and a secure load to the tray connection needs to be created. Scroll to the bottom of the 5 inch film network into a compact cable in the drawing the last part of the packing of the cycle, drive down to tray — about an inch, it is below the deck plate, debt securities or a mixture of locking load tray is the most effective way.
The only way to bind the load to a pallet is not this method, but the way we recommend it is this way. This method than the “normal” (when the movie on a folding – like the rope) for positioning the rope just what you want in the tray is difficult – high enough to prevent puncture the hydraulic car or forklift forks and low enough bonds or lock loaded pallets.
Under the pressure of transportation, regular roping also tends to occur, which makes its efficiency greatly reduced. In fact, our research shows that a thin film cable connection is significantly better than conventional roping.
The goods on each tray should be connected to it is a good rule of thumb.
In today’s world, there are enough risks.
Why take the risk when there is a simple, inexpensive, and effective way to improve the safety of their destination?