The main reason for the film break is improper film threading. The rupture of the film can happen in many cases, such as when it was a film. These cracks occur when the processing attitude of the film is discarded or processed. Buy “cheap” film is not possible, because the “cheap” film has higher defect risk, will produce more follow-up questions, that will bring you more trouble, such as gels, nicks, tears. The “cheap” film may not have as much tear resistance, which is also prone to its broken chances and, if it wants to extend to the performance film, it doesn’t have the ability.
If your film starts to break down, you need to find out as soon as possible, and you’ll need to solve these problems as quickly as possible. You need to ask these questions:
Is Film is thread correct? Is that correct? Is it defective? Gels, nicks, tears, etc.? Do they have sharp corners or bumps for loading and pallets? Is stretching wrapper is the right wrap force set? Are cracks, shearing, or resin piling up on the surface of the film? Film clip (on fully automatic stretch packaging) : what are the scissors clamps? Are there incisions or resin deposits on the surface of the film? For vacuum fixtures: is the air pressure correct? Is the air filter clean? These are questions that you need to think about, which may sound like a lot, but it’s really not that much trouble, as long as you’re willing to do it.
If none of these solutions reveal any problems, you can call your service technician and ask him or her to find the problem and solve the problem. Or for you, it’s ok to turn down the packaging, you can add more film revolutions. And you can say goodbye to the film breaking down! Come on!