Second, Second, stop wasting labor is something you can get.
The operator must perform a series of steps, which are about 20 time-consuming steps. The purpose of these steps is to complete the packaging cycle of a forklift truck on an old machine. Over the course of five years, the process adds up to about $50, 000 in waste, a waste of Labor (46.000). If you need to pack 50 load and payment operators per day ($11) $12 per hour.
The need to cut the film and save to the next cycle at the end of the loop is eliminated by increased automation. Operator can use lanyard switch or remote control device. The purpose is to start the newline cycle, and we all know that it’s not necessary to leave the forklift.
Do you know what another method of saving labor is? It has to do with weighing your load. If weighing your load is what you need to do. So, there is a choice that you have to put your stretch wrap on a scale, or another option is to shift the load to a single scale. It can be said that this process is time-consuming.
We know that there are some new stretching wrappers that have also installed scales on their turntables. The effect of these claims is to eliminate the dual processing load from 30 seconds to 1.5 minutes. Do you know what it does to move them from the wrapper to the independent platform scale? Over the course of five years, this means that 7,500 ($7,000) to 7,500 dollars and (14.000) of the workforce have been eliminated. Third, you can reduce the risk of accidents.
If it is an old machine, it may cause a higher risk of injury to your operator.
Your operator may be in danger of being tripped up. Also, the exposed engines and not sufficiently large turntables are included. No more than load is the purpose. In addition, they may not have updated security features in terms of security features. When he connects the film to the load, the operator’s back strain can be greatly reduced.
Do you know what the new machine does? It has built-in security features. However, old machines do not have built-in security features. If the load is moving, the film breaks. Then, the load will stop. The operator will not be tempted, the operator will not connect the membrane to the mobile load.
Do you know the best way to manage these risks? Avoiding them with the new machine is the best way. Each cycle of attaching and cutting movies is something they do actively. The need to drive from one truck to another is well removed.
.
The operator must perform a series of steps, which are about 20 time-consuming steps. The purpose of these steps is to complete the packaging cycle of a forklift truck on an old machine. Over the course of five years, the process adds up to about $50, 000 in waste, a waste of Labor (46.000). If you need to pack 50 load and payment operators per day ($11) $12 per hour.
The need to cut the film and save to the next cycle at the end of the loop is eliminated by increased automation. Operator can use lanyard switch or remote control device. The purpose is to start the newline cycle, and we all know that it’s not necessary to leave the forklift.
Do you know what another method of saving labor is? It has to do with weighing your load. If weighing your load is what you need to do. So, there is a choice that you have to put your stretch wrap on a scale, or another option is to shift the load to a single scale. It can be said that this process is time-consuming.
We know that there are some new stretching wrappers that have also installed scales on their turntables. The effect of these claims is to eliminate the dual processing load from 30 seconds to 1.5 minutes. Do you know what it does to move them from the wrapper to the independent platform scale? Over the course of five years, this means that 7,500 ($7,000) to 7,500 dollars and (14.000) of the workforce have been eliminated. Third, you can reduce the risk of accidents.
If it is an old machine, it may cause a higher risk of injury to your operator.
Your operator may be in danger of being tripped up. Also, the exposed engines and not sufficiently large turntables are included. No more than load is the purpose. In addition, they may not have updated security features in terms of security features. When he connects the film to the load, the operator’s back strain can be greatly reduced.
Do you know what the new machine does? It has built-in security features. However, old machines do not have built-in security features. If the load is moving, the film breaks. Then, the load will stop. The operator will not be tempted, the operator will not connect the membrane to the mobile load.
Do you know the best way to manage these risks? Avoiding them with the new machine is the best way. Each cycle of attaching and cutting movies is something they do actively. The need to drive from one truck to another is well removed.