Generally speaking, we all know that the direction of the preservation layer and the high preservation layer on the single-side coating rollers are either inward or inward. Adhesive used, the process of rolling process is also not so, if it is a good film design, it is easy to relax, so entangled in the tray, need to do is to seize.
Pulling the film back from the roll is a way to determine how to build a scroll, and then what you need to do is stick it together, if it’s stuck together, it’s the plastic wrap. If this layer does not stick to itself, then we can see that it is not a fresh layer (or a thicker layer of preservation on different rolls).
The slippery concept is to grab the other side of the coin. Low slip is stretch film on the surface of the deed is usually designed, or two inclusions without sticking sliding is allowed, even between the two load, there is an important reaction. As we all know, most of the stretch film L levels are low, so they do not stick together, if they come into contact with the situation, will occur over another. If the pallet load needs to slide with each other, then the right choice may be a thin film with high sliding additives.
If we can set up the stretched wrapping paper and also specify the appropriate film, then a nice feature is attachment. We can see that on a stretch packaging film transfer system, if you don’t put the film clip in a right direction, it is clear that this was a mistake, the wrong operation personnel also won’t soon forget a mistake. Here, there are another possible problems, if be in the wrong direction on a tray, it could also be on the pallet stretch film, we can see that they are in the process of transport location is side by side.
This fpc1 wrapper works best when the movie is being used for your application.