First, stretching is the most important potential problem when a process can lead to a security situation. Trying to stretch a dangerous material like dynamite is a prime example. Stretch packaging explosives and other harmful substances can be tricky, because in some cases, the film is produced by the electrostatic discharge, this problem is very important, for many of the explosives and other harmful substances.
Secondly, the over-packed fpc2 packaging machine may also need some adjustment to the material handling equipment, and the conveyor belt needs to be adjusted. The standard conveyor belt can withstand a heavy weight, which can be as high as 4,000 pounds. Heavy conveyor belts can carry a larger load, which can be as high as 6,000 pounds. For heavier loads, the fpc3 conveyor should be used. For some semi-automatic machine, especially need to consider is the 4000 – pound weight, if the load is more than 6000 pounds of weight, you should use in the above the skin, and only in this way, the floor to support the weight of the load.
Third, the project, such as the same object, such as the car’s exhaust, they have strange size and shape, generally speaking, the different types of packaging system or with the adjustment of the packaging design and material are needed. More suitable for piping are vertical packaging from the top and bottom.
Fourth, we all know that the liquid has another dynamic under the strongest pallet load. The stability of the entire pallet load will be affected when the liquid flows in the container. We can simply say that when the pallet load is applied by the movement of the truck, the liquid will move, and it also ACTS on the wall of the container. Then, the container ACTS to inhibit the stretch film. Liquid on a pallet load is often required to have more control in order to deal with the harmonic motion that occurs when the truck stops, starts, or turns.
Fifthly, the ripple is destroyed by high humidity or tropical environment. In a humid conditions, after 30 days, decreased significantly the walls tends to happen, the 30-40% of the strength was lost, this makes a folding pallet load were caused. If the corrugated paper is issued, the stretching package is the same, without any support, and leads to a pile of boxes, which is not safe for content and packaging.
At the end of the day, it is still true that the basic principles of stretching packaging are applicable. Your load has enough control to be ensured, and if possible, it is ok to use a pallet on the back of the film that is not long or drag.
Secondly, the over-packed fpc2 packaging machine may also need some adjustment to the material handling equipment, and the conveyor belt needs to be adjusted. The standard conveyor belt can withstand a heavy weight, which can be as high as 4,000 pounds. Heavy conveyor belts can carry a larger load, which can be as high as 6,000 pounds. For heavier loads, the fpc3 conveyor should be used. For some semi-automatic machine, especially need to consider is the 4000 – pound weight, if the load is more than 6000 pounds of weight, you should use in the above the skin, and only in this way, the floor to support the weight of the load.
Third, the project, such as the same object, such as the car’s exhaust, they have strange size and shape, generally speaking, the different types of packaging system or with the adjustment of the packaging design and material are needed. More suitable for piping are vertical packaging from the top and bottom.
Fourth, we all know that the liquid has another dynamic under the strongest pallet load. The stability of the entire pallet load will be affected when the liquid flows in the container. We can simply say that when the pallet load is applied by the movement of the truck, the liquid will move, and it also ACTS on the wall of the container. Then, the container ACTS to inhibit the stretch film. Liquid on a pallet load is often required to have more control in order to deal with the harmonic motion that occurs when the truck stops, starts, or turns.
Fifthly, the ripple is destroyed by high humidity or tropical environment. In a humid conditions, after 30 days, decreased significantly the walls tends to happen, the 30-40% of the strength was lost, this makes a folding pallet load were caused. If the corrugated paper is issued, the stretching package is the same, without any support, and leads to a pile of boxes, which is not safe for content and packaging.
At the end of the day, it is still true that the basic principles of stretching packaging are applicable. Your load has enough control to be ensured, and if possible, it is ok to use a pallet on the back of the film that is not long or drag.