Stretching Packing

If the offset by adding more not film, so, caused by the BaoLi will appear a reduction of deterrence, deterrence is the pressure of live load pressure, because of the emergence of this situation, so can lead to happen during the transit load drop, so as to whether the product, or business relationship, can cause great damage.

The packing force on your stretching pack has been set and this needs to be ensured. Also, it is necessary to check your load regularly. The purpose is to ensure that their control is within the standard. Don’t let demon film achieve the purpose of destroying your tensile packaging.

If you don’t know how much control your load should have, you can check our simple guide to get information.


Do you know that there is a serious problem with your stretching packing? Do you know how to solve this problem? We have three ways to stop the number one problem on the stretch wrap. Does that sound good? Well, let’s see what we can do.

As we all know, film fragmentation is not always a worry. This is also the number one problem for stretched packaging, and the problem is getting worse. Usually, they make a series of disastrous consequences happen. So, we can conclude that they are indeed enemies.

Here are three ways we can help you break down your risk for film:

Your load needs to be noticed because you need to prevent your product from sticking out of the load. In the case of load, 40% of the film is broken, which sounds serious, so we need to prevent this from happening, so you need to pay attention to your load. What is the correct sharp Angle? Operators need to go through strict training, teaching staff how to properly handle the film because to teach operators through the transmission system to correct guidance of film, which is a crucial step, you said right?



What’s wrong with your film, you know?

What’s wrong with your film, you know? There are seven reasons why you should be careful about the fragmentation of your film, which is why you should be careful.

Now we can see that the invention of stretching packaging has made great progress, and there have been many technical improvements. We need to help the shipper to assure their customers that their load equipment has minimal damage and minimal cost.

However, we can also see that stretching packaging is not a problem at all. Film fragmentation is the primary problem. On the automatic high-speed stretch of the packaging, the average volume of the film breaks three to seven times, and the chance of breakage is very high.

In this chart, there are at least seven reasons why film is broken. The way, unfortunately, is to understand why the last time the film was broken was not easy.

In a busy environment, it is very difficult to film the film fragmentation, at the same time, it is a tedious and time-consuming work. And if you want to keep the flow of production under pressure, it’s a hindrance to packers’ efforts to find their roots

When the film is broken, reconnecting the film and restarting the machine is what the operator usually does. Normally, this film will break again. As a quick fix, what operators often do is turn to a simple fix, which is the easiest way to turn the packaging down before the film ends.

Although immediate problems are being solved by closing the packaging forces, simple changes can lead to a lot of bad consequences, such as a series of damaging consequences.



Film Breaks

Especially when the film is in the cluster, usually, they do. In addition, for lock, label security procedures, it is time-consuming and laborious. All these situations, we all know it’s all for an operator, therefore, when the film rupture occurs, is very normal film tension into a solution to the problem.

However, despite the imminent problem is solved by us, but a simple knob can trigger a series of problems, these problems are destructive, unintended consequences, it can destroy the whole stretch packaging purpose – need to be to ensure that your product safety to the destination.

As the operator adjusts the membrane tension, it also reduces the control. Ultimately, it leads to higher risk and cost containment. In turn, operators go back to their Settings and make the film tense again.

In fact, the film tension was reduced and did not harm the containment force, if the operator took the appropriate response: more film was added. Unfortunately, forgetting or not knowing that they should do this is what they often do.

What caused the film to break down?

What should you do when the film is damaged? Is it correct to simply reject the film tension? ?

We can see that being caught in this cycle of film damage is a terrible place to be. So when your film starts to break down, the first thing you should notice is:

First, the stretch film of the work.

Does it fit properly?

Should you use this film?

Is it flawed? Like gels, cracks, tears, etc.?

In the second. Load and pallet.

1. Does it have sharp angles or bumps?

Third. What is the stretch wrapper?

Do you know that movie tension is correct?

2. Are there any scars on the surface contact surface, such as incisions, cutting or resin accumulation?

3. What is the membrane clip? What are the scissors forceps? On the surface of film contact, is there any indentation, cut marks, resin accumulation?

What about vacuum fixtures? Is it the right air pressure? Is the air filter kept clean?


Stretch Wrapping


This often results in more fragile packaging, transport and processing pressures that are difficult to adapt to.

Here, you can do something to get over your load on their destination, which is about the same as we have in this blog post.

First, we are packing your load according to the basic stretch packing principle. At least the minimum load required for the load should be known. You have to know how many rotations must be applied to the payload. We should weigh the number of ounces of film on the load. The minimum control can be ensured wherever the load is applied. The load is bonded to a tray. The film is not dragged, led, or tailed. You need to check… Now what you’re doing is what you think you’re doing. Keep at least a change.

Second, you need to make sure your stretch wrapping paper works properly. At the same time, you need to maintain regular maintenance, or have your supplier do regular maintenance for you. The benefits are enormous.

The work of stretching wrapping sends the load from its original location to the destination, but it needs to always be in the sending condition. It can not only make a load glitter, but it can also ship it further. It’s worth it to do the right thing for the first time. We can see that it’s worth doing well.

Finally, when cost savings were involved, manual packaging did not achieve the cost reduction goal. The use of film can be significantly reduced by the machine. The stretched-out wrapping of a power-powered movie delivery system can stretch very high film, for example, by stretching up to 300% of the film, so that at least half of the film consumption can be reduced. For one person, if you want to wrap a load in your hand to stretch the movie, we know that it’s almost impossible.







Hidden Misdeeds

You can eliminate the damage – don’t let them be part of the sprawling crime scene.

You can imagine these photos as evidence of a crime scene. When you try to get to their destination, you’re going to hit some innocent payloads, and they started out with conditions and requirements.

There are hidden misdeeds that are damaged goods. We can see them like a dirty little secret. They admit it is difficult, and they often appear to be swept under the carpet or treated as an occasional nuisance.

But we know that if it’s damaged goods, it’s not just a nuisance. Supply chains are also severely depleted. After the grocery manufacturers association (GMA) and the food marketing institute (FMI) the calculation of loss not for packaging design and performance, they are also difficult to cause so big loss, in food, beverage and consumer goods industries, we can see that probably about 2 billion dollars a year.

In fact, the number is huge.

Under reasonable conditions, most goods can reach their destination today. But if we look at it from a stretch point of view, the risk of failure or damage on the way is increasing, and at an alarming rate.

There are two reasons for this.

We all know that most of the load is bad, or that there is a situation where you are not being stretched. However, it is surprising that the basic stretch packaging principle is not considered, and how much load can be covered if used or improperly stretched packaging techniques. In many cases, the cause of high (and unacceptable) risk of failure is being loaded in the production process.

Also, it is becoming more and more difficult to pack correctly for load. The redesign of the main packaging is what designers are doing and their material content has been reduced, which is why they become eco-friendly products.


Stretch Packing

Do you know anything about stretching packing? It prevents the load from slipping out of the tray. This is a very progressive manifestation.

Every day, the flow of goods from the pallets during transportation can be seen, resulting in billions of dollars lost and wasted each year. If the load does not hold well for its tray, it will be a big risk.

They have different load locking methods for different stretching wrappers. , at the end of the stretch packaging film by some wrappers in the rope like an accordion, the role of the other wrapper is thin film can be rolled into the cable, the others will film wrapped, in general, are wrapped in the bottom of the tray. The most effective is that film is our research result.

Under the pressure of transportation, the general roping trend is also loosened, and its effectiveness has been reduced. However, 3 to 5 inches at the bottom of the film can be winding into a tight cable, then people can push it to the tray – compared with than its deck plate, about an inch – lock load in lower pallets in order to prevent it from sliding off.

We know that the very important thing is the location of the cable. It needs to be high enough to avoid the knife and fork pierced by forklift or pallet, and is low enough for the purpose of locking the load on the tray.

In today’s world, there are many risks. If there is a simple, inexpensive and effective way to get them to their destination, what are the reasons for your risk?

If you want to learn more about locking your load onto a tray, you can look at our video, which is how the machine rolls the film into video.

If you’re looking for ways to improve your stretching packaging process, you can also check out our eBook, packaging and weight benefits of its basic content.



Packing Load


Put the goods in a tray, are you sure you really want to do this?

People buy elastic packages for a reason, and they are generally for a particular reason – packaging is their purpose. Machines, the number of packages at the top and bottom of the program, the packaging, and the speed delivery system for the turntable and film need to be set by them. Then, the machine had enough to make a product that could be wrapped up, which they believed it could get to its destination, but it could not be damaged.

But is it?

No, it’s not!

The most important factor in the effective packing load is the safety of the tray. If this is not the case, it may slip and the product may be damaged during shipment.

For most of today’s stretch wrappers, you’re not ready to deal with this problem. But most people don’t think much of it. When they are encouraged to do it by the machine, wrapping it at the bottom of the tray is what they will do. However, when the weight is picked up by the forklift or the tray fpc1, the film will be punctured by a fork. These puncture holes are also harmful, which can carry out loads that can cause a lot of damage to the membrane during load.

Avoid this problem is our purpose, more advanced stretch wrapper can stretch packaging can’t do other things, it by creating a network of only a few inches at the bottom of the film to make this problem solved. At the end of the cycle of wrap, the film will also automatically around, in general, we can see, this is the film will roll into a tight cable, and it will be left behind, in general are below the tray at the top of the board. We can see that the cable is very tight, lock the load on the pallet can be very good by cable, it is high enough, high enough to remove the fork, the reason is because they can receive the load.



Stretching Packaging


We want to get a good film. If it’s wrapped well, it will work better. Reducing film cost is not the purpose of stretching packaging. What you want to do is get the right restraining force in the lowest movie cost. If the operator wants to overcome the fracture of the membrane, it needs to be realized by reducing the force exerted on the load. This results in a loss of deterrence, unless they want to make up for it by adding more films. This is often overlooked by them, and the likelihood of bad things happening in transit is greatly increased. In general, the thinner the membrane, the lower the package force will be, and the excess film will not be needed, as can be applied. The return of film scale and pretension level decreases. We have to be very careful when choosing these. Better to go up high. With more control (more film) in the top and bottom of the load, most of the load is usually not in the middle. If these loads do not have any damage or transportation problems, if you want to deal with the whole load, the control in the center is sufficient. Generally speaking, the cost reduction will occur at the top and bottom, and the cost will be reduced. If starting from where you’re not sure, a good 70 or 80 degree stretch of stretch film pre-stretching 2000% can be tried. A very good mixing quality is provided by it, and it also provides minimal film fragmentation, acceptable film costs, wide variety of load types, and so on.

We have the Settings here:

When we adjust the new load of the packaging, the starting place is the speed of the turntable or the wrapping arm. If you work to a speed, the load can be processed. In fact, we all know it’s not fun to reload.



Stretch Wrapping

    pallet wrapping, stretch film

Best practices for 15 semi-automatic fpc2.

The manual on how to operate and troubleshoot machines is available for most stretch packages. However, they can’t cover what you need to know to make a safe load created.

What is containment? The retention force of the membrane under load is the containment force – the most important factor in successful transport. It is determined that it is the winding force times the number of film layers of the load. Your own unique control is required for each load, and the shape of the load and the product are the determinants.

Fifteen of the questions about control have been collected by us. Here are some Suggestions for movie breaks and machine Settings. You can find useful things when you build a safe ship.

Tips for stopping power:

A control measuring tool that can be purchased with your stretch wrapper. The function of this tool is to measure the weight of the film on the load. Click here and you can find out how much control you need. If you have a control tool, or you need to know is how much control you, so you need to do is wrap it tightly as possible, does not produce distortion, also can not crush the film. There are a lot of control tools and methods that you can use. You know which one you are using to be guaranteed, and its measurements are not compared to the measurements of other tools. Even with the same tools, measurement differences between people can exist. Rounded up. Having more containment forces is the best outcome, but that’s not enough.

What is movie technique?

When we buy stretch film, don’t buy the cheap ones. “Cheap” film is a fake economy. The product damage is compared with the film cost, which needs to be more cost driven.


Avoid Stretching

As we can see, there are three ways to avoid stretching.

We know that film destruction is more than just a stimulus. Unless they are damaged reasons can be found, and it also can be repaired, otherwise these be broken film can produce a series of problems, these problems are very unpleasant, we also call it as “circle” of the end.

A very bad place is the end of the world. So, when you start to break up, there’s one thing you should be aware of:

First, work on this film

A. does it fit properly?

B. This film, should you use it?

C. It is also defective, such as gel, crack, tear, etc. Is it defective?

Second, about its load and pallet.

It loads a tray. Do they have sharp corners or bumps? This question also needs to be considered.

Third, what is fpc2 stretch wrappers?

A: do you know that the wrap force set is correct?

B. Can you see if there is any indentation or resin accumulation on the surface of the membrane?

C. Film clip, what is a membrane clip, it is a fully automatic stretching wrapper.

I. What is the S clip: on the surface of the film, do you see any nicks or resin piles?

What is the vacuum clamp: is it the right air pressure? This air filter is it clean?

You should know that if these problems haven’t been exposed, you should need some help. You can call your favorite service technician, ask him or her to find your problem, and then help you solve the problem.

Is it ok if we look for other ways to improve? If you want to check us, you need a 10-step process, and if you want to reduce the damage, you need to do it through more effective stretch wrapping. Below, you can take a look at our process, and our process will show you a lot of things:

If you want to reduce shipping losses by 50%, what you should do! What is the key element of stretching packaging standard? The containment force should be managed, it is the mostcritical component of stretching.