A feedback loop needs to be built to make maintenance standards guaranteed.
The truth is, the net savings of movies are not always produced by thinner films! Because of the reduction of film thickness, the rupture of the film will result in the loss of the film layer. Because finding the root cause of a movie break is hard, operators often try to get rid of them by reducing the way they pack power until they stop. Therefore, it is necessary to use more film layers to restore and maintain lost control, and film consumption can be increased.
There is no optimal packaging pattern for each load. However, an optimal containment force is indeed possessed by it. If in my load, 10 pounds of stem strength is required, I can through the use of film and application layers, or the use of a thick film and application layer can also be less, thus we can see the deterrence can be the same, however, is clearly different packaging mode and throughput.
The stretch film of the fpc1 machine usually stretches three times or more to a simple answer.
What is the correct answer? The stretch film, the machine is the factor that determines it, and we all know your product, the load and the target are the most important.
As you can see, this is the complete answer.
Stretching and tension and safety are very confusing.
Sometimes, people wrap plastic in a shrink film that you hear. What they mean, you know, but the stretch film is the right name, and of course we know there’s a reason for that.
The purpose of a modern stretch film is to stretch – but it may not be because of the cause or the extent of your imagination.