The size of the film has been reduced or pre-stretched has increased impact on package force, control, throughput and film costs. We all know that stretching is an economic measure, or, more accurately, that it is an economic measure to stretch a film before it is released. A stretch film that can be affordable is […]
If you want to improve the quality of the stretch film itself, thickness and complexity, will lead to the increased cost of membrane, if used to achieve the desired control membrane layer is reduced, so as to realize the increase of production, so we can see that the film cost should be not bad.
What can I do to make my tray load more effective? What are we going to do when we try to effectively package my tray load? Isn’t this just the theoretical tray load, but the one sitting in front of me? Is that the one on the dock floor? The typical question that our
Generally speaking, we all know that the direction of the preservation layer and the high preservation layer on the single-side coating rollers are either inward or inward. Adhesive used, the process of rolling process is also not so, if it is a good film design, it is easy to relax, so entangled in the
By reducing the film tension or pretension level, the rupture of the membrane caused by the risk of the load is generally reduced. However, as we reduce these, it’s important to remember that adding more membranes is the most important thing to do, so that you can avoid losing control. Observe how your changes
Do you know the reason why the most common stretch film fracture? Stretch film fracture is an inevitable challenge for elastic packaging operators. Typically, three to five times a few customers find the time of each roll. In the best of circumstances, we all know that these breaks are a stimulus. In the worst
Do you know what the glue is? Why is it in the stretch membrane? Is a term used in film, stretch film, its main purpose is stretch packaging machine, to fix a heap of material to a tray is main to do it, its purpose is to form a unitary or single, reliable, and can
A tray that automatically stretches the wrapper from the line, and the input to the packaging area is automatic, based on the control system Settings. When completed, a tray is delivered to the end of the line, and a new tray is automatically transferred to the wrap area. Operators, by contrast, loading and unloading machine is semi-automatic stretch packaging needs to be done, wrap cycle also needs to be started, and also need to be adjusted, the appropriate allows the load to effective packaging can be ensured. First, fpc9 packaging. In the simplest form, a tray is placed on a rotating disk, while the movie delivery system distributes the stretch film on the load. The place where the movie delivery system starts is usually from the bottom of the load, which is then wrapped to the top, and then rolled back to the bottom. The most common type of stretching wrapper is the fpc9 wrapper, which can be configured to use a variety of applications effectively. Second, fpc8 packaging. It’s not like when the turntable machine spins, the state of the load stays still, and the system around the load is the movie delivery system. Unstable, light, heavy loads can be handled by these types of wrappers, which can be packaged from low to high. Third, fpc7 packaging. A fpc7 wrapper wraps a tray on a pallet, usually in the process of moving the conveyor through the machine. People usually use them to make, smooth or bulky goods such as doors, pipes, carpet rolls, coffins, etc. Fourth, fpc6 packaging. These fpc6 are high-speed wrappers that can handle very large loads per hour and can be as many as 200 loads. The industries they often appear in are paper towels, tissues and drinks. The highly specialized machine is fpc6, which USES only a small proportion of stretched packaging today.
Semi-Automatic Stretch Packaging Read More »
To lock the load onto the tray, we have three methods here. Here are three common ways that most loads need to be fixed, and they generally need to be pinned to a tray. Simply wrapping it in the bottom of a tray stretching around the end of the winding loop is the most basic and least effective method. It makes the load particularly vulnerable to the loss of traction from the puncture. At the bottom of the tray, every time a forklift or pallet is inserted into the tray base, the stretch film will be punctured or torn, and the risk of tearing will need to be taken. Some fpc2 packaging machines are making this risk by making a thin film cord. At the end of the stretching loop, the thin film is stuffed into a string resembling an accordion. It is difficult to locate where you want it to be on a tray, and, under the pressure of transport, a thin film of string is often unstrung. With the lifting of the rope, its effectiveness has also been reduced by the sea. Creating a movie cable is the best way to ensure load to a tray. At the end of the stretch, a taut cable is wound from the last 3 to 5 inches of film. Then the cable was pulled down again and pulled to the panel, about an inch below the deck. As we all know, a thin film cable is solid enough to hold the load on a tray, but it is also high enough to allow forklift or a fork on the tray to be cleaned. A good rule of thumb is that each load on the tray, ships should be attached to it doesn’t Pierce or stretch film of tears, is the best way to avoid piercing and tears through the use of a video cable.
What is one of the shortcomings of manual packaging? At any given time, there is a person doing extra work, such as pallet packaging that is the case, and there is a possibility of injury. Damage not only destroys the process, but also reduces the time of the employee, increases in medical expenses, compensation for employees, and so on. In addition, if the injury is debilitating enough, a new employee must be hired, and the new employee needs to be trained, which makes more time and money needed. In addition, if it is manual packaging, it usually USES more lfpc1. Many fpc2 can stretch film to over 200%. For example, two hundred percent of pre-stretching, the length of the film changed, and the 1-foot film became three feet of film, making the film’s consumption and cost much lower. However, inconsistency is the biggest problem with manual packaging. The operator simply does not do the machine, the machine is to wrap the load in the same way. Of course, it is possible for operators to load several good goods in a row, but it is difficult to do every time. To stretch the packaging with a machine is the answer. In almost all scenarios, hidden costs of hand pallet packaging can be well avoided. By reducing the use of the film, you can save money, you fear of injury can also be reduced, rather than the a tray packaged with the hand, and machine drawing by hand is the weight of the package the package tray of more likely. This is why you need to stretch the packaging every time you pack and deliver a tray.